WORLDWIDE ASSOCIATES L.L.C.

|__________________________________________501 18th Ave

Rockford, IL 61104 USA

TELEPHONE: 815-986-8178

FAX: 815-301-5512

E-mail: wwassoc@gmail.com

Web: www.worldwideassociates.com

www.usedburroakequipment.com

SUBJECT: USED EQUIPMENT LISTING (Fin Coil & Appliance Equipment for Sale)

NOTE - NEW E-MAIL ADDRESS: wwassoc@gmail.com

Individual Specification and Pricing information is available on each item, request by the Reference Number.

OAK "RIBBON TYPE" FIN PRESSES AND FIN LINES:

Reference: 102177: Oak Model FP4-48 Ribbon Fin Line, 100 Ton, 1985, with Oak Uncoiler, Ribbon Fin Press with Fin Stock

Lubricator, Stock Guide and Lacer, Die Takeout System, Suction Unit and Progression Changer; Oak 3-Station

Rotary Fin Stacker.

Reference: 102488: Oak Model FP2-42 Fin Press Line, 60 Ton, with uncoiler, Fin stock lube, Suction Unit, Stacker. Built 1974

Reference: 102499: Oak Model FP2-42 Fin Press Line, 60 Ton, Complete Line, Built 1989

Reference: 102489: Oak Model FP2-42 Fin Press Line, 60 Ton, Complete Line, Built 1976. Note: Press has broken crank- suitable for rebuild, priced to sell

Reference: 102490: Oak Model FP1 Fin Press Line, 30 Ton, Complete Line, Built 1972

OAK EXPANDERS:

Reference: 101148: Oak Vertical Single Sided Expander, Model SE-M274, 1984, Maximum Coil Length is 36", Maximum

Coil Width is 36" and Maximum Coil Depth is 8.0". CNC Controls, Ring-Lok Rod Option and Slide Out

Receiver Table.

Reference: 102214: Oak Compact Vertical Single Sided Expander, Model CSE-HT-503-01, 1988, Maximum Coil Length is 44";

CNC Controls, Ring-Lok Rod Option with Floating Final Expansion.

OAK HAIRPIN BENDERS:

Reference: 102161: Oak Double Vertical Hairpin Bender, Model DVBHB-M3, 1985, 12 Tuber Per Cycle (@ 3/8" OD or smaller,)

Maximum Formed Hairpin Length is 36" with (&) Straightening Rolls & (2) Sizing Rolls.

Reference: 102296: Oak Hairpin Bender, Model VBHB-M3-64RH, 1994, Coil Fed, PLC Controls (Allen Bradley SLC501),

Tooled for 6 tubes x 3/8" OD

Reference:102295: Oak Hairpin Bender, Model VBHB-M3-41LH, 1980, coil fed, Relay Logic Controls,

tooled for 6 tubes x 3/8" OD

Reference: 100842: Oak Hairpin Bender, Model VBHB-M2-29, Straight Tube Feed Machine, Maximum Hairpin

Length is 108" (2743.2mm), Currently Tooled for 5/8" OD x 2.0" Centers.

Reference: 102495: Oak Double Vertical Hairpin Bender, Model DVBHB-M5-2, 12 tube capacity, 62" hairpin length,

serial #61476, No Tooling, Built 1976

OAK SERPENTINE BENDERS:

Reference: 100220. OAK Model SBM-32-LH, 1989, 3-Stand, 6-Reel Powered Uncoiler, Single Plane Tube Straightener,

Chipless Cutoff, Auto Part Unload, Touch Screen Controls, Many Other Options, Tooled for Flat Micro

Channel Aluminum Tube 0.157"Thickness x Widths of 0.950" and 1.492".

OAK TUBE STRAIGHTEN AND CUT OFF MACHINES:

Reference: 102399. Burr Oak DSTCOS-M1-10 Tube Straighten & Cut-Off Machine, Double Sided Machine. Processes

two tubes at once, both sides equipped with separate & independent controls. 3/16" to 1" Dia. Tube Capacity.

Reference: 101011. Oak Multi Tube Cut Off. Model OTCO-M2-28, 1969, Straightens and Cuts 4-Tubes Per Cycle,

Oscilating Chipless Type Cut-Off, ½" and 5/8" Tooling.

OAK SIZER & RING ASSEMBLY OR COMBINATION SIZER/RING LOAD MACHINES:

Reference: 101594: Oak Sizer & Ring Assembly Machine. Model SRM-M9-1, 8 Station Hydraulic Rotary

Dial Work Holding Fixture, 24" and 16" Feedmatic Bowl Feeders, Return Bend Sizing Head and Ring

Insertion Fixture. Currently Tooled for 1/4" OD x 1.0" Center Copper Bends.

Reference: 102508: Oak Sizer & Ring Assembly Machine, Model SRM-175 , 2 available

OAK UNCOILERS:

Reference: 101875: Burr Oak Uncoiler, 3-Stand Pedestal Type Uncoiler. Holds (6) Spools of Coiled Tubing.Equipped with 3 Motors. 1/2 hp, 1750 rpm, DC, flanged motor to right angle drive.Each two spools are locked & rotate simultaneously, driven by one motor w/pneumatic rubber tire used as friction drive.

Reference: 101392. Burr Oak Uncoiler, 3 Pedestal, 6 reel, unpowered Coil Stand.
Holds 6 Reels of coiled tubing
Equipped with Electric brakes

Reference: 101175: Burr Oak Model PJCS 6 Spool Powered Uncoiler. 3-Stand, 6-Spool, Powered, Double end uncoiler.
2 available. May be used as a 6 spool uncoiler or combined as a 12 spool uncoiler.

Equipped With: D.C. Motors to Gear Box to Pneumatic Tires which Drive Payoff Reels. Year: 1997

TUBE PUNCHING & ENDFORMING

Reference: 101871: Coilco Tool & Die, Extrupunch Manifold Machine.

Reference: 102253: Universal Tool & Engineering Endformer, Model EF-104, ~1991,

4-Hit Hydraulic Self Contained Unit, Like New.

Reference: 102252: Universal Tool & Engineering Endformer, Model EF-104, ~1988,

4-Hit Hydraulic Self Contained Unit.

Reference: 102254: Universal Tool & Engineering/Stark Endformer, Model 200,
4-Hit Hydraulic Unit.

OAK FIN DIES – RIBBON TYPE:

Reference: 102201: FDM-230, 3/8" x 1" x .866". sine wave, fin range: 6-22, 2 Hole progression, ribbon die
36 Row
Die is configured to utilize the Oak progression feed system, (progression changer) mounted on an Oak FP-2 press.

Die Fits in an Oak FP2-48 fin Press

Reference: 102426: FDM-1479-1, 7mm x 19mm x 11mm Fin, built 2004

Reference: 102473: FDM-1505-1, 1/4" x .827" x .500 Staggered Fin , built 2005

Reference: 102427: FDM-1121-1, 7.30mm x .748mm x .433mm Fin Die, built 2004

Reference: 101714: FDM-106, 1/2" Hole Diameter x 1.25" x 1.0825" Staggered (1.25" Equilateral), 30 Row, 4-Draw,

Rippled Edge, Ribbon Type Die.

Reference: 101136: FDM-106-2, 1/2" Hole Diameter x 1.25" x 1.0825" Staggered (1.25" Equilateral), 30 Row, 4-Draw,

Rippled Edge, Ribbon Type Die.

OTHER BRAND FIN DIES:

Reference: 102246: TRIDAN RDVS-3/2HG-6-1-87. 3/8" OD x 1.000" x 0.866" Staggered Pattern, Corrugated

(Saw Tooth) Fin Surface; Rippled Fin Edge; 30 Row Ribbon Type Fin Die. Designed to run in

a Tridan 75 ton + press with 2.0" stroke but could be adapted to run in an Oak fin press with a

1.50" stroke press if FPI is 10 or higher, built 1981

OTHER ASSOCIATED HEAT EXCHANGE COIL MANUFACTURING EQUIPMENT:

Reference: 102176: (2) FIN MACHINE COMPANY continuous type fin lines (accordion type fins for brazed type

aluminum coils) Models JB12605 (1995) and JB13426 (1996) Fin Size 450mm wide x 1500mm,

with Stack Height of 48" 52" High. Built 1996

WANTED “HOT” ITEMS:

PLEASE HIT THE BACK KEY AND GO TO OUR "EQUIPMENT WANTED PAGE

All prices will be quoted As Is, Where Is, condition and do not include the cost of Dismantling, Rigging, Containerizing or Boxing, Land or

Ocean Freight, Insurance, Documentation Costs, or Port Fees unless otherwise requested. All sale items are subject to prior sale to the first

qualified buyer and buyer's confirmation of assumed reliable specifications provided to WorldWide Associates. Detailed specification /

quotation sheets are available for each individual item upon request. Should you have surplus equipment or tooling please send us complete

details and we will include on our listings. For further information contact Jerry Nelson, WorldWide Associates L.L.C. telephone 815-986-8178

fax 815-310-5512 or Email at wwassoc@gmail.com

Last Update 10 Feb. '09